Quality-Engineered, Proven Field Performance
Quality-Engineered, Proven Field Performance
The Transit TSE Type 2 ambulance delivers precision-engineered performance for EMS providers managing high-volume operations where efficiency and total cost of ownership drive fleet decisions. Purpose-built for frequent transports, scheduled transfers, and non-critical responses, the TSE combines Ford Transit reliability with quality all-aluminum construction that reduces weight, extends vehicle lifespan, and maximizes maneuverability in urban environments. Lightweight aluminum construction provides superior payload capacity while reducing fuel consumption, an integrated multiplex electrical system with MMC diagnostics simplifies maintenance and minimizes downtime, and powder-coated interior finishes resist wear over time to support long-term durability.
Built on Ford’s proven commercial platform with rigorous quality control standards and backed by nationwide service infrastructure, the Transit TSE provides dependable performance for agencies requiring durable Type 2 solutions that maintain reliability across high-mileage operations. The ergonomic interior layout enables efficient patient care while reducing crew fatigue during extended duty cycles. This is precision-engineered design that supports your service model, budget constraints, and long-term fleet strategy.
SIZE IT UP BY CHASSIS
| Drive Type | 4x2 or AWD |
| Overall Length | 236" |
| Overall Width | 98” |
| Overall Height | 103” |
| Interior Headroom | 69” |
| Wheelbase | 148” |
| Avg. Payload Capacity | Up to 2,200 lbs |
Safety-Driven Engineering. Proven Performance.
The Transit TSE delivers operational advantages through precision engineering, rigorous quality standards, and field-validated durability.
Aerodynamic Roof Design
Integrated roof cap maximizes lighting capacity while reducing wind noise and improving overall efficiency.
Lightweight Construction Materials
Strong, durable materials support usable payload capacity while maintaining structural integrity.
LED Emergency Lighting
High-intensity LED warning systems maximize vehicle visibility during emergency operations, improving scene safety and response effectiveness.
EcoBoost® V6 Engine
Combines proven power delivery with fuel-efficient performance to support high-mileage operations and lower total cost of ownership.
Exclusive HVAC Airflow System
Independent hot and cold air ducting delivers consistent temperature control for optimal patient comfort and care delivery.
Lower Cost of Ownership
Provides fuel economy and lower maintenance costs that reduce total cost of ownership across operations.
Details that drive performance
Discover how Transit TSE engineering—from aluminum construction and multiplex electrical systems to advanced HVAC and safety features—delivers superior performance advantages and operational value.
Module Construction & Configuration
- TSE Transit Type II Ambulance Platform
Type II ambulance configuration built on a unibody commercial van platform, optimized for maneuverability, lower overall height, and efficient urban and suburban response - SAE J3026-Compliant Configuration
Next-generation module layout engineered to current industry safety and performance standards. - Standing-Assist Interior Height
69” headroom enables seated and semi-standing caregiver workflows common to Type 2 operations. - Integrated Van Body Design
Factory-integrated body structure provides a continuous cab-to-patient compartment environment, improving communication, climate efficiency, and overall vehicle rigidity.
Exterior & Body Features
- OEM Body Construction with Ambulance Upfit
Retains original body structure while integrating ambulance-specific reinforcements, interiors, and systems. - Undercoating Protection
Comprehensive undercoating on chassis and module extends vehicle life in harsh operating environments. - Anti-Skid Rear Step Bumper
Rear step with an anti-skid surface to support safe patient loading and unloading.
Patient Compartment & Interior
Rear Control & Access Zone
- Rear Control Panel – Touchscreen Console
Rear-mounted touchscreen control panel allows crews to manage lighting and system operation during loading and unloading. - Dual Rear Entry Doors
Wide rear door clearance facilitates efficient cot loading and unloading.
Seating
- Curbside Squad Bench Seating
Full-length thermoformed molded seat cushion with individual thermoformed molded backrests. - Integrated Safety Restraint System
Bench seating is equipped with two four-point safety belt systems for crew security during transport. - Attendant Seat – EVS 1760
Vacuum-formed seamless seat with integrated 3-point restraint and fixed base to support patient monitoring and communication
Forward Bulkhead & Cab Interface
- Sliding Pass-Through Window
Front bulkhead window enables compartment-to-cab communication during transport. - Partitions with Retraining Straps
Upper and lower front partition with retaining straps in front of ALS compartment to secure equipment.
Streetside Configuration
- Flip-Up Cabinet Doors with Sliding Windows
Aluminum flip-up cabinet frames with polycarbonate self-latching sliding windows support visibility and efficient restocking. - Lower Medical Cabinet
Full storage medical cabinet with larger countertop. - Suction System
Main suction system located in front streetside action area. - Interior/Exterior Access Considerations
Cabinet layout designed to maximize usable interior space within the Type II footprint
Curbside Configuration
- Curbside Patient Entry Door
Sliding side-entry door providing secondary access to patient compartment. - Interior Storage and Work Zones
Curbside interior layout supports seated care, equipment access, and caregiver movement - Integrated Entry Lighting
Lighting positioned to support safe ingress and egress during night operations - Oxygen Compartment – Rear Curbside
Vertical oxygen compartment on rear curbside, allowing access door for oxygen tank. - Universal Vertical Oxygen Holder – H, K, or M Cylinder
Universal vertical holder mounted in S1 compartment for “H”, “K”, or “M” oxygen cylinders.
Driver's Compartment
- Control Center with 4.3” Touchscreen
Centralized heads-up interface provides intuitive access to vehicle and module systems, reducing driver distraction and streamlining operational control. - Cab Headliner LED Reading Lights
Overhead LED lights (red & clear) preserve night vision while providing task-focused illumination for documentation and navigation. - Goose Neck Reading Lamp
Mounted on front console for clear visibility during low-light operations. - Integrated Cab-to-Patient Communication
Open design allows verbal communication without electronic intercom systems.
Vehicle Systems
Electrical & Power
- MMC Multiplex Electrical System
Centralized control of lighting, climate, vehicle systems, and diagnostics. - 112V DC Duplex Outlets – 20 Amp
Provide consistent DC power access for medical devices and onboard equipment throughout the patient compartment. - 120V AC Hospital-Grade Outlets with Indicator
Deliver reliable power with clear visual confirmation. - Pre-Wiring for 1000W Inverter/Charger
Pre-wired for future installation of 1000W inverter/charger. - OEM Batteries
Two OEM batteries included for maximum power. - Radio Communications Compartment
Compartment features Bussmann blade-type fuse panels and harness to power the radio communication devices (12v battery feed, ground, ignition).
HVAC & Climate Control
- OEM Tie-In Heating System
Floor-level heat distribution integrates with chassis system and operates independently from AC evaporator for optimal efficiency. - OEM Tie-In Air Conditioning System
Evaporator integrated into the chassis A/C system, delivering ducted cooling throughout the patient compartment. - Ducted Airflow Distribution
Plenum-based delivery system distributes airflow evenly throughout patient compartment while minimizing pressure loss. - Ventilation System
One exhaust fan with three-speed control enables effective contaminated air removal via the front interface or the rear console.
Lighting Systems
- Aero Cab Riser TS with Lighting
Demers’ exclusive 500-Series aerodynamic cab riser with integrated 2RR-2C3RC-2RR warning lighting designed to enhance visibility and roadway awareness. - Exterior Scene and Work Lighting
Four lateral Whelen 600 series LED scene lights to support rear loading and side entry operations. - Emergency Warning Lighting
Four Whelen 600 series LED emergency lights - Grille Lighting – LED
Two LINZ6 series LED lights located in the front grille. - Intersection Lights – LED
Two Whelen 700 series intersection LED lights - Lateral Scene Lighting
Dedicated, integrated LED lateral scene lights provide illumination on both sides of the module. - Rear Spoiler TS with Lighting
Demers’ exclusive aerodynamic rear spoiler with Whelen 500 series (1 red / 1 white / 1 amber / 1 white /1 red) lights for maximum visibility/ - Full LED Interior Lighting Package
LED lighting throughout the patient compartment, including dome lights with four different intensities for efficient, low-heat illumination.
Audible Warning
- Whelen 295-Series Hands-Free Siren
Amplifier with Scan-Lock™ enables hands-free control of multiple siren tones during emergency response. - Whelen SA315 Speakers
Compact speaker system meets SAE Class A standards for emergency warning performance. - Back-Up Alarm
97 dB backup alarm alerts during reverse operation with manual override capability.
Smart Features & Operational Efficiency
- Demers Fast Idle
Multiplex-controlled fast idle enables rapid battery recharging during stationary operations. - Anti-Theft Idle Protection System
Enables keyless idle operation while preventing unauthorized vehicle movement. - Compact Vehicle Footprint
Smaller overall size improves maneuverability, reduces driver fatigue, and simplifies navigation in tight response areas. - Lower Step-In Height
Reduced step-in height supports faster ingress/egress and lowers crew fatigue over long shifts.
Transit TSE Type 2 Ambulance Questions, Answered
These answers address the most common questions we hear from organizations evaluating the Transit TSE Type 2 ambulance, including purchasing, configuration, service support, and ownership.
Who is the Transit TSE ambulance designed for?
The Transit TSE Type 2 ambulance is engineered for EMS providers where operational efficiency, total cost of ownership, and crew safety drive fleet decisions—including interfacility transport operators managing high-volume non-emergency transfers, hospital-based transport services conducting scheduled patient movements, municipal EMS agencies operating tiered BLS response systems, and private EMS providers covering both emergency and non-emergency transport contracts. Backed by 65+ years of manufacturing experience, Demers Type 2 ambulances deliver precision engineering and quality construction built to last across demanding high-mileage operations.
How do I purchase a Transit TSE ambulance?
The Transit TSE is available through our authorized Demers dealer network. Your local dealer will configure the unit to your operational requirements, recommend the appropriate chassis, and provide pricing, customization options, and delivery timelines. Get started by requesting a quote or scheduling a demo.
What makes the Transit TSE different from other Type 2 ambulances?
Built on 65+ years of manufacturing expertise with ISO 9001:2015 certification and full KKK-A-1822F, CAAS GVS, and FMVSS compliance, the Transit TSE delivers precision-engineered quality that sets it apart. Industry-leading all-aluminum construction provides proven crash protection and superior payload capacity while reducing maintenance costs and fuel consumption across the vehicle’s lifespan. Powder-coated interior finishes ensure long-term durability, integrated multiplex diagnostics minimize downtime, and the optimized crew-centered layout improves workflow efficiency.
Real-world proven in demanding EMS operations and backed by rigorous quality control standards, the Transit TSE offers the lowest total cost of ownership in the Type 2 segment with a professional appearance that reinforces your commitment to crew safety and operational excellence.
What is the typical lead time for a new Transit TSE ambulance?
Lead times for a Transit TSE ambulance vary based on chassis availability, production schedules, and selected options. Your Demers dealer will provide accurate timelines to support fleet planning and operational transitions.
What warranty coverage comes with the Transit TSE?
Every Transit TSE includes comprehensive limited warranty protection against defects in materials and workmanship. Covered repairs are completed at no charge within the warranty period through our authorized dealer network. Beyond warranty terms, Demers provides responsive technical support and clear communication to resolve issues efficiently, minimize downtime, and keep your unit in frontline service throughout ownership.
Where can I take my Transit TSE for service or repairs?
The Transit TSE is supported through our nationwide network of authorized Demers service providers. These partners receive factory training on our electrical systems, module construction, and component specifications to ensure accurate diagnostics and repair. Whether you need routine maintenance, warranty service, or emergency repairs, our service network is equipped to minimize downtime and return your unit to frontline service quickly. Your local Demers dealer can connect you with the nearest authorized service facility and coordinate support for your fleet’s specific needs.
How do I order parts for my Transit TSE?
Order replacement parts directly through your authorized Demers dealer. Genuine Demers parts ensure system compatibility, maintain performance standards, and protect long-term durability.
Is training available for new Transit TSE owners?
Yes. Demers provides comprehensive orientation through our dealer network to ensure crews master the Transit TSE’s layout, systems, and features before deployment. This accelerates operational readiness and enables confident, safe performance from day one.